There are two versions of the fi8910w camera. the latest firmware for each version supports no-ip.this would be 11.22.2.46 and 11.37.2.46. note the second digit in the firmware version differs between the two camera versions and must be maintained when you upgrade - the firmware is unique to each camera version and incompatible with the other.. How to setup foscam fi8910w september 15, 2014 september 15, 2014 / spacescientist99 there are a couple of things to consider before you decide to buy this camera.. This service will post dynamic updates to your no-ip hostname when your internet service provider decides to issue you a new ip address. to enable ddns functions in your foscam device you will first need to have a no-ip account and hostname created..
Unboxing & setting up the foscam fi8910w. foscam comes with an ethernet cable, power adapter, setup booklet and the mount with screws. you will need the ethernet cable to configure the camera, if you are setting it up for wireless access.. To setup foscam’s ddns update service, open the camera’s web interface, go to the settings and there is a section for ddns near the ip configuration section we used earlier.-enter the domain name you setup with no-ip.-enter your ddns username and password that you setup with no-ip.-click save.. Review -tutorial configuracion c
